General
The stones for our traditional trees are sculpted cast bronze and have a .020″ leaded brass plate attached to the surface for engraving. The contemporary stones are cut from 1/4″ thick yellow brass (which matches the contemporary trunk) and also come with a .020″ leaded brass plate for engraving.
Saxton does provide engraving for these products.
Small Bronze
- Size: 5-1/2″ x 3-1/2″
- Material: Cast bronze stone with 4-3/4″ x 2-3/4″ x .020″ blank brass plate for engraving
Large Bronze
- Size: 7-1/2″ x 5″
- Material: Cast bronze stone with 5-3/4″ x 3-7/8″ x .020″ blank brass plate for engraving
Small Brass
- Size: 7″ x 4-3/4″
- Material: 1/4″ thick cut out yellow brass with 4-3/4″ x 2-3/4″ x .020″ blank brass plate for engraving
Large Brass
- Size: 11-1/2″ x 8″
- Material: 1/4″ thick cut out yellow brass with 5-3/4″ x 3-7/8″ x .020″ blank brass plate for engraving
Cast Donor Stone
- Size: 12″ x 8″, “Rock-Edge” border design
- Material: Cast bronze with integral, cast copy (up to four lines)
Helpful Hints
- All leaves and the plates for the stones are made from leaded yellow brass with a clear, protective lacquered finish. Once they are engraved, an oxidizing solution may be used to turn the copy black.